
Single 1″ Roll
One 1″ × 105′ roll in the color (and spacing) of your choice. About 101 uses per roll.
Color-coded spacing tape, invented by a working mason. No more worn-out rulers or unreadable pencil marks — every course lands true.
Joint spacing for 2¼″ brick
Designed on the job by a working bricklayer who was tired of fighting a brick ruler and pencil.
Mark corner posts, speed leads and story poles in a fraction of the time — and never re-measure.
Five spacings, five colors. Pick your course, follow the color, and every joint lands the same.
Standard 1″ × 105′ rolls in five color-coded spacings, plus 2″ corner rolls and our new tape for builders. Change quantities at checkout — shipping is calculated in the cart.

One 1″ × 105′ roll in the color (and spacing) of your choice. About 101 uses per roll.

One roll each of yellow, red, green, blue and orange — every course spacing in a single buy.

Wider 2″ × 105′ roll for inside and outside 90° story-pole corners. Red, green or blue.

Our new color-coded tape for builders — same time-saving idea, built for framing and general layout. Build it quick.
Marking off courses with a brick ruler and a pencil is slow, and the marks wear away by mid-afternoon. QuikCourse draws its inspiration straight from that hassle. Lay the tape once and your spacing is fixed, repeatable and easy to read all day long.
Every scale is calibrated to standard 2¼″ brick. Pick the color that matches your course and the joints take care of themselves.
QuikCourse comes in 1″ × 105′ rolls — about 101 uses each. Buy a single color or save with a pack. Quantity and shipping are calculated in the cart.
Real work from real masons — corner posts, story poles, arches and finished openings laid out with color-coded tape.
Find your joint spacing on the color scale — from 2-1/2″ (yellow) to 2-3/4″ (orange) on center.
Grab a single roll, or save with the 5-Pack to keep every spacing on the truck.
Stick it to your corner posts, story poles or work surface and start laying brick.
KwikTape comes from Accurate Color-Coded Masonry Concepts — a small Massachusetts shop founded by Mike Cahalane, an experienced mason. The whole idea grew out of the daily hassle and confusion of marking off courses by hand.
It's a simple, honest tool made by someone who has stood behind the line and wanted layout to go faster. That's still who you reach when you call.
It's a color-coded tape you apply to corner posts, speed leads, story poles, straight edges — or directly to your work surface. Each color marks a fixed joint spacing, so every course lands in the same place without re-measuring.
Each color is a joint-spacing scale based on standard 2-1/4″ brick: Yellow (#2) is 2-1/2″ on center, Red (#3) 2-9/16″, Green (#4) 2-5/8″, Blue (#5) 2-11/16″, and Orange (#6) 2-3/4″ on center.
Standard rolls are 1″ wide × 105′ (about 101 uses). A 2″ wide × 105′ roll is also available in red, green and blue for inside and outside 90° story-pole corners.
Yes. The tape will follow any surface — masons use it on arches, curved openings, corner posts and straight edges alike.
Choose a single roll or a pack, then set your quantity — shipping and handling are calculated at checkout. Prefer to talk it through? Call (508) 520-3301 and we'll sort it out.